Search

Welcome to Hebei Shengtuo Machine Tool Accessories Producing Co, Ltd

+86-317-3076658     +86-317-3076608

Adress:Building No.26-120,International Hardware Business Area,Xinhua District,Cangzhou City 061000,Hebei Province,China

Contact us:

+86-317-3076658

+86-317-3076608


©2018  Copyright Hebei Shengtuo Machine Tool Accessories Producing Co, Ltd 
冀ICP备18024968号

>
>
>
Fault analysis and solution for the Shield of machine tool guideway

Fault analysis and solution for the Shield of machine tool guideway

Author:
Source:
2018/06/19 10:36
Page view
[Abstract]:
Guide shield manufacturers of basic knowledge we in front of the article introduced to you, so today we continue to introduce to you when the Machine Tool Guide Shield factory failure.

Guide shield manufacturers of basic knowledge we in front of the article introduced to you, so today we continue to introduce to you when the Machine Tool Guide Shield factory failure, we should how to solve it.

When you encounter a problem, we have to use the following methods to eliminate: 1, the visual inspection method: This method is the first use of maintenance personnel methods, that is, in the fault diagnosis, from the outside to observe and check.

Notice whether there is a shortage of parts. 2, machine tool guide Shield Manufacturers parameter Inspection method: When the failure should be timely check system parameters, parameters are generally stored in the magnetic bubble memory or stored in the battery to be maintained by the Cmosram, once the battery is insufficient or due to external interference factors such as the machine Tool Guide shield manufacturers of individual parameters lost or changed, chaos, Make the machine not working properly.

At this point, you can check and correct the parameters to troubleshoot. 3, function detection method: Functional program testing is the CNC system g, M, S, T, F functions programmed into a functional test program, and stored in the appropriate media, such as paper tape and tape.

This program can be quickly used to determine the probable cause of the malfunction when the machine tool guide shield manufacturer's fault diagnosis is run.

4, the trial Exchange method: That is, in the analysis of the cause of the failure, maintenance personnel can use the standby printed circuit board, integrated circuit chips or components to replace doubtful parts, so that the machine tool Guide shield manufacturers to reduce the fault range to the printed circuit board or chip level. We can judge through the above several methods to solve the problem, if still not solve the problem, we can contact the technician, we will answer for you in time.